2021 Thermo King T-890 Base

Information

2021 Thermo King T-890

Premium HMI Included | ConnectedSuite™ Telematics Built-in | Delivering the capacity, reliability and uptime that fit your demanding schedule, the new T-90 Series of self-powered truck refrigeration units truly offer MORE.

Features may include:

Product Information

The T-890 & T-890 MAX are Thermo King’s next generation refrigeration units for straight trucks. Featuring industry leading capacity, maintenance intervals, temp control, as well as the most advanced technology you can buy.

  • 2,000 hour maintenance interval – the longest in the industry
  • Premium HMI – the easiest to use and most power control interface
  • Integrated Connected Suite Hardware – streamline your operations at the flip of a switch
  • Opti-Set Plus – Optimize unit settings and parameters to deliver what matters most to you; temp control, fuel savings, operator error elimination
  • Industry leading capacity – gives you faster pull-down, faster recovery after door openings, less fuel burned and fewer engine run hours; delivering results that matter to your bottom line

Photos

Highlights

  • Billings, Montana
  • 2021
  • Thermo King
  • T-890 Base
  • TK374F (Tier 4) | Coolant Type: Factory filled with Chevron Delo® XLC extended life coolant (ELC). 55/45 gylcol/water concentration Freeze protection of -40°F/ -40°C | Thermostat: 160 F (71 C)
  • Ultra low sulfur diesel (ULSD) fuel only [conforming to ASTM D975] No. 2 diesel fuel under normal conditions No. 1 diesel fuel is acceptable cold weather fuel
  • Available

Specifications

  • 2021
  • Thermo King
  • T-890
  • Base
  • General
  • TK374F (Tier 4) | Coolant Type: Factory filled with Chevron Delo® XLC extended life coolant (ELC). 55/45 gylcol/water concentration Freeze protection of -40°F/ -40°C | Thermostat: 160 F (71 C)
  • Ultra low sulfur diesel (ULSD) fuel only [conforming to ASTM D975] No. 2 diesel fuel under normal conditions No. 1 diesel fuel is acceptable cold weather fuel
  • API Classification CJ-4 or CK-4 ACEA Rating E6 | Viscosity: 14 F to 122 F (-10 C to 50 C): SAE 15W-40 (Synthetic) | 5 to 104 F (-15 to 40 C): SAE 15W-40 | 5 to 104 F (-15 to 40 C): SAE 10W-30 (Synthetic or Synthetic Blend) | -13 to 104 F (-25 to 40 C): SAE 10W-40 | -13 to 86 F (-25 to 30 C): SAE 10W-30 | -22 to 122 F (-30 to 50 C): SAE 5W-40 (Synthetic) | Below -22 F (-30 C): SAE 0W-30 (Synthetic)
  • 7.64 quarts (7.23 liters/litres) | Expansion Tank Cap Pressure: 10 psig (69 kPa)
  • 9.0 quarts (8.5 liters/litres) crankcase and oil filter / 10.0 quarts (9.5 liters/litres) w/Bypass Oil Filter - Fill to full mark on dipstick